|
|
Microwave planar circuits design and fabrication
Šamořil, Lukáš ; Láčík, Jaroslav (referee) ; Mikulášek, Tomáš (advisor)
The bachelor‘s thesis deals with planar microwave circuits especially directional couplers and microwave power dividers. First, the thesis describes about microwave circuits and directional couplers and then about power dividers microwave. Types, properties, principles of operation and design of these circuits are described in more detail. Further, the work is devoted to the specific design, the simulation and the optimization of the hybrid ring directional coupler divider and Wilkinson’s divider operating at the frequency 1.5 GHz. Those two microwaves circuits are fabricated and the measured results are compared with simulated results. The circuits will be used in a student's laboratory.
|
|
|
Basic measurement on the Vector network analyzer
Lapčík, Josef ; Urbanec, Tomáš (referee) ; Dřínovský, Jiří (advisor)
This bachelor project concerns with a vector network analyzer for measurement of reflection coefficient, carry coefficient and scattering coefficients. Main parts of vector network analyzer and principle of analyzer with relation to possible areas of error correction are described. Possibilities of using modern vector network analyzer are shown in relation to their conception. Second part of the project deals with design of filters and directional coupler designed for measuring on analyzer. Designs of lowpass filter, bandpass filter and branch-line directional coupler are describe in details. Results of filters analysis from program Ansoft Designer and results of measurement on vector network analyzer are appended. The last part of project focus on creation of application for automatic measurement on network analyzer in program interface Agilent VEE.
|
|
|
Power amplifier for 2 metres radio amateur transmitter
Klapil, Filip ; Vařacha, František (referee) ; Prokeš, Aleš (advisor)
This work deal with development a solution of a power amplifier for 2 metres radio amateur transmitter with a minimum output of 1 kW. Part of the solution is to use a commercial module of power amplifier. In addition, the design of the input attenuator, the switching elements in the signal path, the output filter and the protection circuits including cooling. The bachelor thesis contains a proposal of a system solution with a discussion of required performance and legislative requirements. This is followed by a hardware section, where the work is devoted to the design of the hardware, the theoretical calculation of the components and the simulation. In the last part of the work deals with practical implementation, verification of function and measurement of achieved parameters and their evaluation.
|
|
|
RF Power Amplifiers
Hrazděra, Tomáš ; Hubík,, Vladimír (referee) ; Šebesta, Jiří (advisor)
This work deals with high-frequency power amplifiers. In the theoretical part are briefly summarized the general characteristics and properties of particular working classes of amplifiers focusing on their efficiency. The next section is aimed on design of high-frequency power amplifier for 1296MHz band and its individual components. In this part is desribed design of hybrid combiners - splitters, directional couplers of the coupled lines, amplifiers with RA18H1213G module and power amplifier with transistor BLV958. The work also includes the results of simulations of designed circuit, realization procedure and the measured parameters of manufactured components. In conclusion of this work the theoretical and measured values are compared.
|
|
|
Construction of an impedance analyzer
Slinták, Vlastimil ; Smékal, Zdeněk (referee) ; Mikulka, Jan (advisor)
The aim of this master’s thesis is to build stand-alone impedance analyzer for mesasuring antennas’ impedance. The vector network analysis is used as measuring method. Analog (with directional coupler and gain and phase detector) and digital (with 8bit AVR microcontrollers) part of analyzer are described and then build.
|
|
|
System for control of high-frequency power source with reflected power measurement
Zoufalý, Ondřej ; Drexler, Petr (referee) ; Juřík, Karel (advisor)
This thesis briefly describes the function of the selected high-frequency technology and its use. Furthermore, the thesis contains a discussion of the method of designing a system for control of high-frequency power source with reflected power measurement, after which the selection of suitable components is carried out based on pre-selected parameters. Subsequently, the method of powering and cooling the system is proposed. This is followed by the actual assembly of the system and testing of its functionality and measurement of system parameters. In the last part, selected parts of the printed circuit board of this system are described and justified.
|
|
|
Power amplifier for 2 metres radio amateur transmitter
Klapil, Filip ; Vařacha, František (referee) ; Prokeš, Aleš (advisor)
This work deal with development a solution of a power amplifier for 2 metres radio amateur transmitter with a minimum output of 1 kW. Part of the solution is to use a commercial module of power amplifier. In addition, the design of the input attenuator, the switching elements in the signal path, the output filter and the protection circuits including cooling. The bachelor thesis contains a proposal of a system solution with a discussion of required performance and legislative requirements. This is followed by a hardware section, where the work is devoted to the design of the hardware, the theoretical calculation of the components and the simulation. In the last part of the work deals with practical implementation, verification of function and measurement of achieved parameters and their evaluation.
|
|
|
RF Power Amplifiers
Hrazděra, Tomáš ; Hubík,, Vladimír (referee) ; Šebesta, Jiří (advisor)
This work deals with high-frequency power amplifiers. In the theoretical part are briefly summarized the general characteristics and properties of particular working classes of amplifiers focusing on their efficiency. The next section is aimed on design of high-frequency power amplifier for 1296MHz band and its individual components. In this part is desribed design of hybrid combiners - splitters, directional couplers of the coupled lines, amplifiers with RA18H1213G module and power amplifier with transistor BLV958. The work also includes the results of simulations of designed circuit, realization procedure and the measured parameters of manufactured components. In conclusion of this work the theoretical and measured values are compared.
|
|
|
Microwave planar circuits design and fabrication
Šamořil, Lukáš ; Láčík, Jaroslav (referee) ; Mikulášek, Tomáš (advisor)
The bachelor‘s thesis deals with planar microwave circuits especially directional couplers and microwave power dividers. First, the thesis describes about microwave circuits and directional couplers and then about power dividers microwave. Types, properties, principles of operation and design of these circuits are described in more detail. Further, the work is devoted to the specific design, the simulation and the optimization of the hybrid ring directional coupler divider and Wilkinson’s divider operating at the frequency 1.5 GHz. Those two microwaves circuits are fabricated and the measured results are compared with simulated results. The circuits will be used in a student's laboratory.
|
|
|
Basic measurement on the Vector network analyzer
Lapčík, Josef ; Urbanec, Tomáš (referee) ; Dřínovský, Jiří (advisor)
This bachelor project concerns with a vector network analyzer for measurement of reflection coefficient, carry coefficient and scattering coefficients. Main parts of vector network analyzer and principle of analyzer with relation to possible areas of error correction are described. Possibilities of using modern vector network analyzer are shown in relation to their conception. Second part of the project deals with design of filters and directional coupler designed for measuring on analyzer. Designs of lowpass filter, bandpass filter and branch-line directional coupler are describe in details. Results of filters analysis from program Ansoft Designer and results of measurement on vector network analyzer are appended. The last part of project focus on creation of application for automatic measurement on network analyzer in program interface Agilent VEE.
|
guest ::
